topcoat® Series
Efficiency and Reliability in Powder Coating Technology
topcoat® M4 Manual Powder Gun
The MS topcoat series represents the latest technological advances for automatic and manual powder coating applications,
while offering uncompromised performance characteristics.
Emphasized ease of maneuverability and performance of the powder gun are exhibited through a streamlined and ergonomically balanced design, created to effectively reduce operator fatigue. An ultra-light gun weight increases operator productivity.
MS topcoat features a wide range of extensions and accessories, including an easily adapted sample cup accessory for the manual gun.
MS topcoat benefits from the latest in control technology. An easy to read operator touch screen control interface allows the operator access to simple and advanced control functions, even when
wearing protective gloves. Advanced feed-back signal control allows
dramatically increased first-pass transfer efficiencies, amounting to considerably higher yields in powder application and
productivity cost savings.
All guns are designed for ease of operator cleaning and maintenance. A minimum number of replacement spare parts ensure long life and reliability. Take the test today and see why the exciting line of MS topcoat application equipment offers the best value in today’s powder coating market.
___________________________________________________________________________________________________________________________________________
topcoat® A4 Automatic Powder Gun
___________________________________________________________________________________________________________________________________________
topcoat® M4 Manual Powder Gun
topcoat® A4 Automatic Powder Gun
MS topcoat M4 manual powder gun features:
- Ultra-light weight, only 380-grams / 13.4-oz.
- Ergonomic balanced gun design.
- Programs and powder settings accessible from manual powder gun.
- Latest digital electrostatic cascade technology with advanced feed-back circuit, 0-100-kV / 0-100 μA
- Use of all commercially available powders, including metallic flakes.
- Range of tips and nozzles for all applications, including sample cup attachment.
- Ease of color change.
MS topcoat A4 automatuc powder gun features:
- Imprvoved coating appearance characteristics with less back ionization due to sophisticated microamp feed-back technology.
- Automatic guns are extendable using tube and click system.
- Use of all commercially available powders, including metallic flakes.
- Ease of color change.
- ATEX Conformity.
topcoat M4 manual | |
Powder Gun M4 | |
Weight | 380g /13.4 oz |
Length | 350 mm / 13.75“ |
Output Voltage | 100 kV |
Polarity | Negative Corona |
Protection Category | IP 64 |
Powder Output | 450g/min / 16 oz |
topcoat A4 | |
Powder Gun A4 | |
Weight | 480g /13.4 oz |
Length | 350 mm / 13.75“ |
Output Voltage | 100 kV |
Polarity | Negative Corona |
Protection Category | IP 64 |
Powder Output | 450g/min / 16 oz |
___________________________________________________________________________________________________________________________________________
topcoat M4 with Cup
topcase S4
MS topcoat S4 control features:
- Easy to read and program digital touch screen control panel interface.
- Pre-programmed control functions set for first coat, re-coat and complex part geometry.
- Up-to 999, programmable slots available.
- Use with Corona or Tribo charging MS gun systems.
- Patented Corona feed-back circuit provides high quality finish with-out use of special accessories.
- Diagnostic control functions.
- Modular construction allows for easy expansion for manual or automatic applications.
- Modular control concept.
topcoat M4 with Cup | |
Powder Gun M4 | |
Weight | 650g / 23 oz |
Length | 350mm / 13.75“ |
Output Voltage | 100 kV |
Polarity | Negative Corona |
Protection Category | IP 64 |
Powder Output | 450g/min / 16 oz |
topcase S4 | |
Controller S4 | |
Power Supply | AC) 100-240 VAC / 50 - 60 Hz |
Input Air Pressure | 6 - 8 bar |
Measurements B x H x T | 200x120x280 mm / 8“x5“x11“ |
Weight | 4.1 kg / 9 LBS |
Protection Category | IP 64 |
Connection | Tribo / Corona |
___________________________________________________________________________________________________________________________________________
topcoat
___________________________________________________________________________________________________________________________________________
MS Corona Pulversprühpistolen
___________________________________________________________________________________________________________________________________________
MS Corona powder guns display an excellent powder charging and extremely high degree of application. State-of-the art digital control and high voltage technology improve the penetration depth, surface finish and powder consumption. The easy-to-clean gun construction establish the prerequisites for an optimal long service life of spare parts and for a fast, automated colour change.
MS Corona Powder - Charging Principal
The high voltage on the nozzle end (electrode) is generated by the integrated high voltage cascade in the body of the gun. Between the earthed/grounded work-
piece and the electrode an electrical field is formed with voltages of up to 100 kV (100,000 V) which transmits a negative charge to the individual powder particles. Due to the fact that they are all negatively charged, the powder particles repel each other and disperse them selves evenly in a fine spray cloud which then lands on the earthed work-
piece. Powder particles which shoot by the work-
piece remain in the electrical field and land on the reverse side of the work-
piece. The little current caused is bled off by the suspension gear to the earthing. The activation and control of the guns is carried out by a digital control unit which is connected to the guns by a low voltage cable
